CO2 Laser alama DW-30CO2

CO2 Laser marking machine, wato carbon dioxide Laser marking machine, ya kasu kashi RF tube CO2 Laser alama inji da gilashin tube CO2 Laser alama inji.amfani da CO2 gas a matsayin matsakaicin aiki.Wavelength na 10.64um Laser, Laser makamashi yana ƙarawa ta hanyar nazarin galvanometer da F-Theta madubi mayar da hankali, sarrafa daidaitaccen katin kula da kwamfuta da Laser, hoto, rubutu, Figures da Lines a kan aikin yanki bisa ga bukatun mai amfani don yin alama.

Babban Kanfigareshan
& Siffar

Injin yana da tsayayye kuma abin dogaro, kuma yana da awoyi 24 ci gaba da iya aiki.Ya dace da ci gaba da samar da adadi mai yawa, nau'in da yawa da kuma yanayin da ke da madaidaitan.

Muna amfani da Original BJJCZ babban allon,EzCad software, barga yi, goyon bayan Win7/8/10 tsarin.Ana iya samun na'ura mai yare da yawa, abu mafi mahimmanci shine sauƙin aiki.

CO2 Laser alama DW-30CO2
CO2 Laser alama DW-30CO2

Cikakkun bayanai

01

Cikakkiyar ƙofar gaba da baya tana ba da damar dogayen kayan wucewa, Ƙirar siffar baya ta musamman tana ba da damar sanya kayan haɗi a ƙarƙashin na'ura, tsafta da sararin samaniya.

CO2 Laser alama DW-30CO2
CO2 Laser alamar DW-30CO2 (3)

Co2 RF karfe tube Laser alama inji amfani High gudun Galvo shugaban, high daidaito da kuma Speed.High ingancin Laser scanning tsarin sa alama gudun har zuwa 7000mm / s.

02

03

Babban madaidaicin ginshiƙin ɗagawa
Tsarin ɗagawa da hannu, mai sauƙin aiki da sauƙin amfani.The Laser mai da hankali tsawon za a iya gyara sama da ƙasa bisa ga daban-daban irin kayan da alama kayan.Rocker hannu iya daga sama da ƙasa da 500mm, Abu tasiri alama tsawo 330mm. (ZABI) 800mm tsawo lantarki dagawa shafi.

CO2 Laser alamar DW-30CO2 (1)
CO2 Laser alamar DW-30CO2 (4)

The harsashi abu na mu inji ne duk aluminum gami, babu tsatsa da lankwasa.

04

05

Yi amfani da shahararriyar wutar lantarki ta Taiwan “MW” tare da tsayayyen aiki. fasaha na fasaha da tsawon rayuwa.

CO2 Laser alamar DW-30CO2 (2)

Ƙayyadaddun Fasaha

Ƙarfin Laser 35W / 60W (USA Synrad)
Tushen Laser Davi / CDR RF karfe tube
Software EZCAD
Sarrafa Katin sarrafa BJJCZ
Tushen wutan lantarki Taiwan Meanwell
Tsawon tsayi 10.64 UM
Laser matsakaici CO2 Laser
Yana goyan bayan tsarin hoto PLT, BMP, JPG, PNG, TIP, PCX, TGA, ICO, DXF ect.
Tsarin aiki Win7/8/10 tsarin
Zurfin alamar alama 3mm (bisa ga kayan)
Saurin yin alama 1-7000mm/s
Mafi ƙarancin faɗin layi 0.1mm
Mafi ƙarancin hali 1 mm
Daidaitawa ± 0.01mm
Inji duka iko 500w
Tushen wutan lantarki 220V / 110V± 10%, 50 ~ 60Hz
Alamar mita 0-20khz (daidaitacce)
Wurin yin alama 110*110/200*200mm
Abubuwan da aka shafa Kayan da ba na ƙarfe ba
Girman kunshin 73*48*54CM
Kunshin nauyi 55KG

Aikace-aikace

Abubuwan da ake buƙata
Dace da fata, denim, acrylic, kayan itace, resin epoxy, guduro mara kyau, yadi, filastik, yumbu, magani, roba da wasu kayan ƙarfe.

Masana'antu masu dacewa
Kayan abinci, marufi na abin sha, marufi na magunguna, yumbun gini, kayan sakawa, fata, maɓalli, yankan masana'anta, itace, sassaƙan gora, kyaututtukan sana'a, samfuran roba, abubuwan lantarki, farantin harsashi, da sauransu.

CO2 Laser alamar DW-30CO2 (5)

  • Na baya:
  • Na gaba:

  • Ku rubuta sakonku anan ku aiko mana