masana'anta

Masana'antar tufafin kasar Sin ta fara a makare.Haƙiƙanin farawa ya fara ne a cikin 1980s, wanda ya cika ƙarni fiye da na ƙasashen Turai da Amurka.A farkon, zai iya ba da tufafin abu ɗaya kawai, kuma a hankali zai iya samar da jerin tufafi.A cikin wannan tsari sana'ar tufafin ƙasara na ƙara girma a hankali kuma ta samar da nata tsarin sarrafa masana'antu.

 

Waɗanne tufafi ne suka dace da yankan Laser CO2?

Auduga, lilin, fata, roba zaruruwa da yadi, Polyester, Aramid, Kevlar, Fleece, Polypropylene, Polyurethane, Fiberglass, Spacer yadudduka, Felt, Silk, Tace ulu, fasaha yadi, roba yadi, Kumfa, Fleece, Velcro abu, saƙa yadudduka. , raga yadudduka, Plush, Polyamide, da dai sauransu

 

Menene zai faru lokacin da tufafi suka hadu da laser?Kuma wadanne inji Dowin zai iya bayarwa don yanke masana'anta?

 

 

 

Tare da Dowin masana'anta Laser sabon fasaha na iya gane aiki na iri-iri alamu da alamu, kamar sassaƙa na m alamu, embossing engraving na kauri masana'anta saman kayan, da Fasasshen magani na sauki-to-fashe yadudduka.

 

 

1.Dowin Fabric Laser cutters hade tare da CDWG iri tube, babu rawaya gefen lokacin yankan masana'anta

 

 

2.Co2 lebur yankan tare da auto ciyar da na'ura don mirgine yankan

 

 

3.Vision Laser yankan tare da Kamara don masana'anta da aka buga

masana'anta sabon na'ura

Shawarar Injin Laser

 

1600mm x 1000mm (63 ″ x 39 ″) aiki yanki, saukar da kayan yi har zuwa 1600mm (63) fadi.
 

Wannan injin yana fasalta gadon jigilar kaya wanda aka daidaita tare da mai ba da wutar lantarki don kawo kayan ku gaba kamar yadda ake buƙata.
 

Ko da yake tsara don yi kayan, wannan Laser inji ne m isa Laser yanke lebur kayan a takardar.

Lokacin da ake buƙatar sakawa kamara don yankan ƙira.

●Dowin bugu Laser abun yanka Yana amfani da canon kamara, high fitarwa daidaito.●Yanke ta hanyar ɗaukar kwane-kwane kai tsaye.

●Taimakawa gyare-gyaren jagora ta hanyar software don magance matsalar gurɓataccen abu.● Zaɓin ciyarwa ta atomatik don gane ci gaba da aiki.

masana'anta sabon na'ura

Tsarin Kamara na Smart Vision

Laser abun yanka sanye take da iko Smart Vision Software da Kamara System.

Canon 1500 Kamara an ɗora a saman samanLaser sabon na'ura.Bayan an ciyar da kayan zuwa teburin yankan Laser, kyamarar tana ɗaukar hoto na ƙirar da aka buga a lokaci ɗaya a cikin duka yankin aiki a lokaci ɗaya.Software yana ƙirƙirar fayil ta atomatik bisa ga siffa da girman ƙirar, sa'an nan kuma kawukan Laser ya yanke daidai tare da jigon tsarin.Yana ɗaukar kusan daƙiƙa 10 kawai don ɗaukar hotuna da ƙirƙirar fayiloli. tsari yana cikin tsarin, Kamar hoton da ke ƙasa:

hangen nesa Laser abun yanka

Shawarar Injin Laser

 

 

Samfura

DW-1610/1814/1825/1630

Wurin sarrafawa

1600*1000mm/1800*1400mm/

2500*1800mm/3000*1600mm

auto ciyar yankan tebur

iya

yanke Gudu

0-18000mm/min

Kamara

Canon

Laser tube ikon

80W/100W/130W/150W

Tsawon igiyar Laser

10.6 ku

rabon ƙuduri

0.025mm

Lokacin yin alama da sauri akan jeans, kuna buƙatar na'urar daukar hotan takardu na Galvo, 600 * 600mm ko ma girman alamar alamar 800*800mm:

masana'anta sabon na'ura

Shawarar Injin Laser

 

Girman aiki:0-400*400mm ku

(Zabin Dynamic mayar da hankali na iya yin alama max 1200*1200mm)

1) Sino-galvo 2808 galvanometer

2) Teburin aiki na zuma

3) S&A CW-5200 chiller ruwa kyauta

4) Taimakon software na gaske na EZCAD nasara 7/8/10

5) Shahararriyar alama-Beijing RECI W4(100W-130W) Co2 Laser tube

6) Taiwan Meanwell samar da wutar lantarki

Dowin Laser yankan ya fi daidai, kuma yana iya kaiwa ga gibin da yankan na yau da kullun ba zai iya taɓawa ba, wanda ke da matukar mahimmanci ga cikakken gabatar da ra'ayoyin masu zanen.

Ku rubuta sakonku anan ku aiko mana