I-CO2 laser emaka i-DW-30CO2

Umshini wokumaka we-CO2 laser, okungumshini wokumaka we-carbon dioxide laser, uhlukaniswe umshini wokumaka we-RF tube CO2 laser kanye nomshini wokumaka wengilazi we-CO2 laser.usebenzisa igesi ye-CO2 njengendlela yokusebenza.Ubude begagasi be-laser engu-10.64um, amandla e-laser akhuliswa ukuskena kwe-galvanometer nokugxila kwesibuko se-F-Theta, lawula ikhadi lokulawula elijwayelekile kukhompuyutha ne-laser, isithombe, umbhalo, izibalo nemigqa kucezu lomsebenzi ngokuya ngezidingo zomsebenzisi zokumaka.

Thumela i-imeyili kithi

Thola intengo

Ukucushwa Okuyinhloko
& Isici

Umshini uzinzile futhi uthembekile, futhi unekhono lokusebenza eliqhubekayo lamahora angama-24.Ilungele ukukhiqizwa okuqhubekayo kwenani elikhulu, izinhlobo eziningi kanye nemvelo yomshini wokunemba okuphezulu.

Sisebenzisa ibhodi eliyinhloko le-Original BJJCZ, isofthiwe ye-EzCad, ukusebenza okuzinzile, ukusekela uhlelo lwe-Win7/ 8/10.Umshini onezilimi eziningana ungatholakala, into ebaluleke kakhulu ukuthi kulula ukuwusebenzisa.

Imininingwane

01

Isicabha esigcwele sangaphambili nangemuva sivumela izinto ezinde ukuba zidlule, Idizayini yomumo okhethekile wangemuva ivumela izesekeli ukuthi zibekwe ngaphansi komshini, zicocekile futhi zonga isikhala.

Umshini wokumaka we-Co2 RF metal tube laser womaka usebenzisa isivinini esikhulu se-Galvo ikhanda, ukunemba okuphezulu kanye ne-Speed.Isistimu yokuskena nge-laser yekhwalithi ephezulu yenza isivinini sokumaka sifike ku-7000mm/s.

02

03

Insika ephakamisa ukunemba okuphezulu
Isistimu yokuphakamisa ngesandla, kulula ukuyisebenzisa futhi kulula ukuyisebenzisa.Ubude be-laser focal bungalungiswa phansi naphezulu kuye ngezinhlobo ezahlukene zezinto nezinto zokumaka.Ingalo ye-Rocker ingaphakamisa iphinde yehle ku-500mm,Into ukuphakama okusebenzayo kokumaka okungu-330mm.(Ongakukhetha)ikholomu yokuphakama kagesi engu-800mm.

Impahla yegobolondo yomshini wethu yonke i-aluminium alloy, akukho ukugqwala nokugoba.

04

05

Sebenzisa ugesi odumile wase-Taiwan“MW” onokusebenza okuzinzile.ubuchwepheshe obuchwepheshile kanye nesikhathi eside sempilo.

I-Tech Specifications

Laser Amandla	35W / 60W (USA Synrad)
Umthombo we-Laser	Davi / CDR RF metal tube
Isofthiwe	EZCAD
Lawula	Ikhadi lokulawula le-BJJCZ
Ukunikezwa kwamandla kagesi	I-Taiwan Meanwell
Ubude begagasi	10.64UM
I-Laser medium	I-CO2 Laser
Isekela ifomethi yesithombe	PLT, BMP, JPG, PNG, TIP, PCX, TGA, ICO, DXF ect.
Uhlelo lokusebenza	Win7/8/10 uhlelo
Ukujula kokumaka	3mm (ngokwezinto ezibonakalayo)
Isivinini sokumaka	1-7000mm/s
Ububanzi bomugqa obuncane	0.1mm
Ubuncane bezinhlamvu	1mm
Ukunemba	±0.01mm
Amandla aphelele womshini	500w
Ukunikezwa kwamandla kagesi	220v/110V±10%, 50~60Hz
Ukumaka imvamisa	0-20khz(iyalungiseka)
Indawo yokumaka	110110/200200mm
Izinto ezisetshenziswayo	Izinto ezingezona ezensimbi
Usayizi wephakheji	734854CM
Isisindo sephakheji	55KG

Isicelo

Izinto ezisetshenziswayo
Ifanele isikhumba, idenim, i-acrylic, imikhiqizo yezinkuni, i-epoxy resin, i-resin engagcwalisiwe, izindwangu, ipulasitiki, izitsha zobumba, umuthi, irabha nezinye izinto zensimbi.

Izimboni ezisebenzayo
Ukupakishwa kokudla, ukupakishwa kwesiphuzo, ukupakishwa kwemithi, izitsha zobumba, izindwangu zezingubo, isikhumba, izinkinobho, ukusika indwangu, ukhuni, ukubaza uqalo, izipho zobuciko, imikhiqizo yerabha, izingxenye ze-elekthronikhi, ipuleti legobolondo, njll.