Igwe njiri mara FIBER LASER

  1. Kọmpat na obere ihe: igwe akara laser nke nwere obere nha, ịdị arọ dị arọ, igwe akara laser dị mfe iburu, galvanometer nwere ike ịtụgharị ogo 90 dị ka ihe achọrọ, akara laser a dabara adaba maka akara n'akụkụ na ọrụ pipeline.
  2. Laser beam stabilization: laser kwụsie ike, obere mfu, free si n'èzí uzuzu na n'ibu mmetụta, laser marking doo kwụsie ike.
  3. Igwe nrịbama laser enweghị ihe ndozi, enweghị akụkụ a na-eri eri, ọ nweghịkwa mkpa ịgbanwe ma ọ bụ hichaa oghere.
  4. The laser marker nhazi ọsọ bụ 2-3 ugboro nke omenala laser marking igwe.
  5. Ụdị ntụpọ nke akara laser dị mma na ike kachasị elu dị elu, enwere ike nweta mmetụta kachasị mma n'otu ihe ahụ.
  6. N'iji usoro ikuku jụrụ oyi jikọtara ọnụ, ihe eji eme ihe, ọdịdị nke igwe akara laser dị mfe.
  7. Ogologo ndụ eriri eriri laser dị ogologo, nwere ike ịdịru ihe karịrị awa 100000 maka iji ya eme ihe, n'elu nke a.ọ dị elu kwụsiri ike arụmọrụ.
Igwe njiri mara FIBER LASER
Igwe njiri mara FIBER LASER

Ntinye vidiyo

Nkọwapụta teknụzụ

Ike laser 20W 30W 50W
Ogologo ogologo nke laser 1064nm
Ogo beam M2 <0.05
Akụrụngwa njikwa Ezcad
Omimi akara ≤0.3mm
Ịcha omimi ≤1mm (30W 50W 100W akara 1-3mins ugboro ugboro mgbe ahụ nwere ike bee)
Ọsọ akara ≤7000mm/s
Obosara ahịrị kacha nta 0.01mm
agwa kacha nta 0.5mm
Nha akara 110 * 110mm (200mm 300mm nhọrọ)
Ike eletrik <500W
Voltaji na-arụ ọrụ 110/220V ± 10%, 50/60HZ
Ụzọ oyi Ikuku jụrụ oyi
Ambient okpomọkụ na-arụ ọrụ 5 Celsius - 40 Celsius C
Ụdị eserese akwadoro AI, BMP, DST, DWG, DXF, DXP, LAS, PLT
Sistemu arụ ọrụ WinXP/ 7/8/10 32/64bits
Ogologo ndụ nke Fiber Laser Module 100 000 awa
Interface nkwurịta okwu USB
Igwe net arọ 32KG
Nha nha igwe 70* 35 * 78CM

 

Ngwa

Ụlọ ọrụ ndị ọdabara:
Ngwa eletrọnịkị: Resistors, Capacitors, Chip, bọọdụ sekit ebipụtara, kiiboodu, wdg.
Akụkụ Mechanical: Bearings, Gears, Standard Parts, Motor, wdg.
Akụrụngwa: Panel Board, Nameplates, Precision equipment, etc.
Ngwa ngwaike: Mma, Ngwa, Ngwa eji atụ, Ngwa ịkpụ, wdg.
Akụkụ ụgbọ ala: Pistons & Rings, Gears, Shafts, Bearings, Clutch, Light.
Ihe ndị dị mkpa kwa ụbọchị: Ọrụ aka, zipa, ihe njide igodo, ihe nchekwa ihe, wdg.

Ngwa ngwa:
Fiber laser marking machine nwere ike na-arụ ọrụ na ọtụtụ metal akara ngwa, dị ka igwe anaghị agba nchara, Brass, Aluminium, Steel, Iron wdg, na nwekwara ike akara na ọtụtụ ndị na-abụghị metal ihe, dị ka ABS, naịlọn, PES, PVC, Makrolon, wdg .

Igwe njiri mara FIBER LASER
Igwe njiri mara FIBER LASER

  • Nke gara aga:
  • Osote:

  • Dee ozi gị ebe a ziga anyị ya